Homogenizing Furnace
The ELIK homogenizing furnace is a specialized heat-treatment device that prepares cast billets for extrusion heating, which is the upstream heat treatment phase for 6061, 6063, and 7-series high-strength aluminum profiles. Dendritic segregation, coarse and brittle grain-boundary precipitates, thermal stress, and structural non-uniformity introduced during solidification are all present in billets right after casting. Left unaddressed, these flaws manifest as extrusion cracks, surface ripping, and uneven mechanical characteristics. The homogenizing furnace eliminates them at the source. The furnace heats billets to a long-duration soak of 540-580°C using forced hot-air circulation, holding the temperature to equalize the chemical composition and structure across the billet. This homogenized starting condition enables stable, defect-free extrusion downstream. Systems are offered in two configurations: batch (car-type) and continuous (stepping), and they are normally delivered as a full set with a billet cooling chamber.
- Improved material uniformity
Homogenization eliminates casting segregation and hard spots, resulting in a high degree of consistency in the metallographic structure. This measurably increases the yield and performance stability of demanding industrial applications, such as automotive and photovoltaic components. - Enhanced stability and ductility
By releasing residual casting tension, it prevents cracking, peeling, and splitting during extrusion, significantly reducing scrap. - Efficient and precise temperature control
An energy-efficient insulation design is combined with a control accuracy of ±3–5°C to ensure consistent batch quality.
ELIK's billet heating furnaces can produce a homogenizing effect and refine the cast structure during the heating cycle (see Performance Results). The homogenizing furnace that is specifically designed for high-strength 6061 and 7-series alloys and applications where metallurgical consistency is non-negotiable provides a prolonged, higher-temperature soak (540–580°C) with forced circulation. The billet furnace's built-in refinement may suffice when throughput and energy efficiency are the primary concerns; however, the homogenizing furnace is the optimal solution when maximal structural uniformity is necessary.
