Aluminum Extrusion

Ageing Furnaces

Contact Us

Age-hardening alters the characteristics of an alloy by applying heat under regulated conditions. After previous heat-treatment procedures, ageing increases aluminum's tensile strength, yield strength, and hardness. The ageing furnace is the key piece of equipment in this process: it modifies the alloy's microstructure by precisely controlling temperature, soaking, and cooling, easing internal stress and improving strength and dimensional stability. It is employed in aluminum, magnesium, stainless steel, and superalloy products.

Core Technical Parameters (standard model)
  • Temperature range Room temperature at 250°C
  • Control accuracy ±1°C
  • Chamber temperature uniformity ±3°C
  • Basket size Customizable (e.g. 6000 × 800 × 600mm)
  • Power supply 380V / 50Hz, three-phase five-wire
Specifications
Model Basket size (mm) Heating time (min) Max. load per cycle (T) Temp. difference (°C) Energy (m³/t) Total power (kW)
6-basket double/ single door To customer spec 60 10 ≤±2 7–7.5 40–50
9-basket double/ single door To customer spec 60 15 ≤±2 7–7.5 60–75
12-basket double/ single door To customer spec 60 20 ≤±2 7–7.5 70–90
18-basket double/ single door To customer spec 60 30 ≤±2 7–7.5 80–110
24-basket double/ single door To customer spec 60 40 ≤±2 7–7.5 100–135
27-basket double/ single door To customer spec 60 45 ≤±2 7–7.5 110–150
  • Ageing furnace sized to monthly output.
  • Heating: natural gas, LPG, all-electric, or gas + electric hybrid.
  • Car-type or roller-type loading, matched to automated logistics or on-site layout.
  • Longitudinal or lateral air circulation, selected by profile type.
Advantages
  • Accurate temperature measurement within ±1°C
    Temperature regulation is precise to ±1 °C, ensuring no fluctuations.
    Inspection data from Taishan Jinqiao's high-end aluminum manufacturing showed temperature control within ±1°C.
  • Energy-efficient below 7 m³/t
    Natural gas consumption is as low as 7m³ per tonne of aluminum.
    Case study: Test findings at customer Sanxing Aluminum showed consumption below 7m³/t.
  • Solid, mechanically stable construction
    High-strength 45-steel forged bearing seats (crack-resistant); high-temperature 970308 bearings in the chamber (no sprocket jams); and Φ45 shafts in quenched-and-tempered 40Cr alloy steel that resist deformation, bending, and seizing, rated to carry loads exceeding 40 tonnes.
  • Explosion protection system
    Continuously monitors flammable gas and carbon monoxide concentrations in the chamber, providing both audible and visible warnings. When the alert threshold is exceeded, the buzzer and light illuminate, the gas valve automatically shuts off, and the exhaust system begins.
Working Principle

Following solution treatment or cold working, metal has a supersaturated solid solution and residual stress. The ageing furnace heats the workpiece to 120-300°C (depending on the material) and soaks it for several to several dozen hours, causing the solute atoms to precipitate as fine, dispersed strengthening phases or releasing internal stress thereby increasing the material's strength, hardness, corrosion resistance, and dimensional stability.

Elik is a company specializing in the R&D and manufacturing of aluminum extrusion processing equipment and industrial furnaces. It provides aluminum profile processors with equipment for ingot pre-treatment, inline post-extrusion handling, and offline heat treatment. Elik possesses the capability to design and deliver fully integrated production lines, with an annual production capacity of 300 energy-efficient heating furnace units and 20 complete production lines.
Downstream Equipment for Aluminum Extrusion