Die Ovens

Contact Us

The die oven is a specialized piece of equipment that is dedicated to heating extrusion dies from room temperature to 450–500°C prior to their placement on the press. The pre-heating of the die is a crucial step in the preparation of the product to ensure smooth extrusion and high quality. This process prevents the cracking that occurs when a cold die suddenly meets extrusion pressure, extends the life of the die, and ensures that the aluminum flow and forming quality are consistent.

Key Process Parameters
  • Suitable die size Φ140–Φ500mm, length ≤ 800mm
  • Rated temperature 450–520°C
  • Normal working temperature 460–480°C
  • Temperature control accuracy ≤ ±2°C
  • In-furnace temperature difference ≤ ±3°C
  • Heating power 30–150kW (by chamber size)
  • Insulation layer Aluminum-silicate fiber, 350mm thick
  • Heating method Resistance heating tube
Specifications
Press tonnage Cavities Heating time (h) Die temp. difference (°C) Total power (kW)
600T– 1450T 1 2.5–3 ≤±5 12–18
1650T– 2000T 2 2.5–3.5 ≤±5 30
2400T– 3600T 3 3–4 ≤±5 60
4000T– 7000T 4 4–5 ≤±5 120
8000T– 10000T 4 5–6 ≤±5 180
Structural Characteristics
  • Furnace body: made of high-strength steel-plate welded shell, lined with premium stainless-steel plate, and has a full aluminum-silicate fibre module core that is more than 350mm thick for minimum heat loss.
  • In-furnace circulation fan: a high-temperature centrifugal fan located on top of or alongside the furnace chamber.
  • Temperature control: PID or PLC with multi-stage control, real-time thermocouple measurement, over-temperature alert, and power-outage safety.
  • Sealing: To reduce heat loss, a high-temperature fibre blanket and pneumatic clamping are used on the furnace door and drawer.
Optional Configurations
Type of loading
  • Drawer type: dies are pushed in and laid flat; suitable for small-to-medium dies (Φ ≤ 250mm). The corresponding green light illuminates to signal readiness and prevent operator error when the set temperature is reached, as each drawer is equipped with its own digital timer and three-color audible-visual alarm light.
  • Car (bogie) type: designed for heavy dies (Φ 300–500mm); motorised in/out with automatic sealing.
Heating element
  • Standard: resistance heating tubes / infrared radiant tubes.
  • Premium: electromagnetic induction coils (rapid-heat type).
Elik is a company specializing in the R&D and manufacturing of aluminum extrusion processing equipment and industrial furnaces. It provides aluminum profile processors with equipment for ingot pre-treatment, inline post-extrusion handling, and offline heat treatment. Elik possesses the capability to design and deliver fully integrated production lines, with an annual production capacity of 300 energy-efficient heating furnace units and 20 complete production lines.
Downstream Equipment for Aluminum Extrusion